基于连续损伤模型的复合材料波纹梁压溃分析

复合材料的耐撞性受到了广泛重视,而波纹梁因其优异的抗屈曲构型被广泛应用于飞机翼梁和直升机底板等经常发生碰撞的结构中。进行了复合材料波纹梁的屈曲分析,研究了高度对波纹梁破坏模式的影响。建立复合材料波纹梁的连续损伤单波模型,层内基于Hashin判据建立含损伤因子的损伤刚度矩阵,层间根据二次名义应力准则和B-K准则模拟损伤演化,并通过典型复合材料波纹梁压溃试验验证了所建立模型的正确性。基于单波分析模型,通过施加周期性边界条件和反对称边界条件,研究了多波结构的吸能特性。     

空间站燃烧科学实验系统设计

建立空间站燃烧实验系统，可满足未来空间微重力燃烧实验系统需求.通过空间站微重力燃烧实验研究，可拓展空间燃烧学研究.根据所要实现的功能及燃烧实验需求，对中国空间站燃烧柜的燃烧科学实验系统进行了设计和分析.燃烧科学实验系统由8个子系统组成，是一个适合开展气、液、固多种燃料燃烧实验的综合性实验系统.考虑到强度设计要求，在完成方案设计后，对系统进行了有限元分析，并在研制的结构件上进行了力学环境实验.实验与分析结果表明，本文设计的实验系统能够满足环模实验的要求，结构合理可行.      

基于伴随方法的单级低速压气机气动设计优化

采用梯度方法对某型4.5级压气机最后级进行气动设计优化研究，梯度由连续伴随方法计算确定，多排伴随方程采用伴随掺混面模型进行数值求解。首先，采用基于经验修正的初步设计方法设计带进口导叶的4.5级低速、低压缩比压气机的原始气动外形。之后，在压气机近失速工况对最后级静子叶片进行伴随气动设计优化，通过优化叶型和安装角降低流动损失，目标函数定义为加权求和形式的熵增和流量偏差，优化中对流量进行约束。最后，开展基于伴随方法的多工况气动设计优化研究，改善两个不同转速条件下最后级的气动性能。优化结果表明，基于伴随方法的多排气动设计优化可以通过改变叶片气动外形提升多排全工况气动性能。     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

双模块下颌式内转进气道/圆锥前体一体化布局研究

为实现三维内转进气道的内收缩流场与圆锥前体的外压缩流场的良好匹配，提出了一种双模块下颌式内转进气道/圆锥前体(Double-modules Chin Inward-turning Inlet and Conical Forebody，DCII/CF)一体化设计方法，获得一种新颖的双发并置、侧向安装的DCII/CF一体化布局。针对该布局形式，开展了DCII/CF一体化构型与传统的单模块内转进气道/圆锥前体(Single-module Inward-turning Inlet and Conical Forebody，SII/CF)一体化构型的数值对比研究。结果表明：DCII/CF一体化布局不仅为内转进气道提供了优秀的前体附面层排移效果，还有效避免了传统SII/CF布局中前体附面层与进气道内部流场之间的相互干扰。在Ma∞=6.0设计状态，DCII/CF一体化布局的进气道总压恢复系数相较传统的SII/CF布局有了显著提高，从0.403提高至0.482；但由于前体附面层的排移，该布局的捕获流量略有降低， SII/CF的流量系数为0.956，该布局则为0.917。而在非设计状态，该布局形式同样具备较好的总压恢复性能，在Ma∞=5.0与Ma∞=4.0的总压恢复系数分别达到了0.586和0.682，明显高于SII/CF的总压恢复系数0.507和0.619。     

部署retro-GEO巡视器的月球借力飞行轨道分析

retro-GEO是指逆行（retrograde）地球静止轨道（geostationary Earth orbit, GEO），该轨道与GEO轨道高度相同或相近，但倾角为180°，安装在retro-GEO卫星上的巡视器可每12h对GEO带空间资产附近碎片环境安全预警。直接西向发射retro-GEO卫星存在地面测控和发射能耗较大的困难。基于平面四体模型，为降低设计变量敏感性，以近月点参数为设计变量，建立了部署retro-GEO巡视器的月球借力飞行轨道设计模型，利用轨道动力学模型延拓策略，得到该类轨道绕月后返回地球飞行时长只能约为114.79h，该结论可用于求解该类轨道高精度轨道动力学模型解。     

Application of a modified generalized sail model on a solar sail with wrinkles

In this paper, we present an analysis of effect of wrinkles on the solar sail performance. We describe different analytical, semi-analytical and numerical approaches to the calculation of general large-scale curvature of a solar sail as well as parameters of so-called wrinkled domains, and introduce the impact of such wrinkles on the thrust and torque of the solar sail. Finally, we present a model of an optically-orthotropic surface for such non-ideal sail, providing a connection with the Generalized Sail Model, and other solar sail thrust models.     

Comparison of GPS derived TEC with the TEC predicted by IRI 2012 model in the southern Equatorial Ionization Anomaly crest within the Eastern Africa region

We have compared the TEC obtained from the IRI-2012 model with the GPS derived TEC data recorded within southern crest of the EIA in the Eastern Africa region using the monthly means of the 5 international quiet days for equinoxes and solstices months for the period of 2012 – 2013. GPS-derived TEC data have been obtained from the Africa array and IGS network of ground based dual-frequency GPS receivers from four stations (Kigali (1.95°S, 30.09°E; Geom. Lat. 11.63°S), Malindi (2.99°S, 40.19°E; Geom. Lat. 12.42°S), Mbarara (0.60°S, 30.74°E; Geom. Lat. 10.22°S) and Nairobi (1.22°S, 36.89°E; Geom. Lat. 10.69°S)) located within the EIA crest in this region. All the three options for topside Ne of IRI-2012 model and ABT-2009 for bottomside thickness have been used to compute the IRI TEC. Also URSI coefficients were considered in this study. These results are compared with the TEC estimated from GPS measurements. Correlation Coefficients between the two sets of data, the Root-Mean Square Errors (RMSE) of the IRI-TEC from the GPS-TEC, and the percentage RMSE of the IRI-TEC from the GPS-TEC have been computed. Our general results show that IRI-2012 model with all three options overestimates the GPS-TEC for all seasons and at all stations, and IRI-2001 overestimates GPS-TEC more compared with other options. IRI-Neq and IRI-01-corr are closely matching in most of the time. The observation also shows that, GPS TEC are underestimated by TEC from IRI model during noon hours, especially during equinoctial months. Further, GPS-TEC values and IRI-TEC values using all the three topside Ne options show very good correlation (above 0.8). On the other hand, the TEC using IRI-Neq and IRI-01- corr had smaller deviations from the GPS-TEC compared to the IRI-2001.     

基于Ansys Icepak 的负载器热设计与热分析

基于热设计的基础理论与负载器的工作原理，应用Ansys Icepak仿真软件对供配电负载器工作过程中内部散热情况进行仿真，找出负载器内部温度最高部位，指导实际测试，避免实际测试的盲目性。另外，通过优化负载器散热孔设计，降低负载器温升值。     

SSPS-OMEGA超大型球形聚光器结构拓扑构型与设计

为同时兼顾千米量级尺度空间太阳能电站聚光系统的在轨发射安装难度、光学收集效率、稳定性及结构工艺等多方面的因素，提出采用基于球面正多面体的经纬线划分法模块化构建球形聚光器。该方法不仅可实现基础划分单元分布均匀、规格种类少，降低在轨构建与运载发射难度。而且只要合理控制弧高等分数和基础划分单元的口径就可以同时保证聚光系统的光学收集效率。理论与仿真结果显示，当弧高等分数为24时，该划分法共有25种基础单元件，整个球面被分成5762块。并且此时模块化构建的实际球形聚光器的光学收集效率与理想球面相比基本保持不变，解决了太阳能电站聚光系统设计中存在的关键问题。